General Functions - Belux Multisens III DIM MULTI 3 Mode D'emploi

Operation Operation

General Functions

Switch lamp On/Off
Altering the brightness
It has been switched off
with a short press:
It has been switched on
with a short press:
Note:
12
 P ressthebuttonbriefly1time
Press the button.
Keep it depressed until the
desired brightness is reached.
1. Press the button. Keep it
depressed until the desired
brightness is reached.
Switch between light increase
and light decrease:
2. Release button and press
again. Keep it depressed
until the desired brightness is
reached.
An alteration of the brightness causes a deactivation of the
brightness control. When switched on the next time the brightness
control is activated again, insofar as this is enabled with the
selected operating mode.
Every short press of the button
switches the lamp on or off
respectively.
The lamp switches on with
min. brightness.
As the button continues to be
pressed the lamp becomes
brighter. After the button is
released the intensity of the
lamp remains constant.
The brightness changes.
After the button is released the
intensity of the lamp remains
constant.
Every renewed long press of
the button causes a switch
between light increase and light
decrease.