Assembly; Tools Required For Assembly; Handle Assembly - Campbell Hausfeld WL6701 Instructions D'utilisation Et Manuel De Pièces

Operating Instructions and Parts Manual

Assembly

tooLs requIreD For AsseMbLy

Ratchet with 3/8 inch Socket
u

hAnDLe AsseMbLy

1. Slide handle into shroud holes,
making sure handle is on the outside
of the bracket and the holes of the
handle line up with the holes of the
tank bracket.
2. Insert screws through handle and then
the bracket. Using a ratchet with 3/8
inch socket, tighten screws to hold the
handle in place.
10
www.chpower.com
Figure 9 - handle assembly