Pag. 8
•
Never open the door quickly if the cycle has not finished.
•
Do not put bare hands into the wash solution.
•
Never remove the machine panels if the power upline has not been turned off.
•
The professionally trained personnel who install the machine and connect the
electricity, will explain to the user how to operate the machine and which safety
measures to use.
•
The installer will provide practical demonstrations and leave written instructions which are
provided with the machine.
This machine is only to be used for the purpose for which it was
•
designed. Any other use is considered improper and dangerous.
•
The machine is not to be used by untrained personnel.
•
Never use the machine if any of the protections (microswitches, panels or other)
provided by the manufacturer are missing.
•
Do not use the machine to wash objects not compatible with those indicated by the
manufacturer.
•
All repair work must be done by the manufacturer or an authorized service center
using original spare parts.
•
Failure to observe this may affect the safety of the machine.
•
The power supply should be turned off when the machine is not being used.
•
Never put magnetic items close to the machine.
•
Never use the machine if not provided with the filters in the tank.
Ambient Temperature : 40°Cmax /4°Cmin ( average 30°C)
Altitude
Relative humidity
Transport and Storage : between -10°C and 55°C with peack until 70°C ( max 24 hrs )
USE AND MAINTENANCE MANUAL
In the second dial the display shows the set value in seconds; it is
possible to increase or decrease the switching time through L and G
push-buttons.
Note: The point indicates ½ second.
Rinse aid
Once the detergent has been adjusted press push-button "A" once
again to pass to the following item and to display "bL" rinse aid. Press
push-buttons "L" and "G" to increase or decrease the switching time.
CHAP.3
: until 2000 metrical
: max 30% at 40°C / max 90% at 20°C
SAFETY RECOMMENDATIONS
3.1
RESIDUAL RISKS AND WARNINGS
3.2
NORMAL SERVICE CONDITIONS
GB