Technical Specifications; Recommendations For Use - Bartscher 370.230F Mode D'emploi

The illustration depicts main appliance parts and the list includes their descriptions and
functions.
A) Structure: it is made of anodised aluminium.
B) Basin: used to contain food product to be pressed. It is equipped with an extractor disk
(B1) which, using the button (B2), facilitates pressed product removal.
C) Press: used to press food product using the lever (C1).
The press is equipped with a compartment (C2) used to contain packaging disks.

TECHNICAL SPECIFICATIONS

Table 1: Technical appliance specifications
Description
Food product diameter
Appliance dimensions
Packaging dimensions
Net weight
Installation type

RECOMMENDATIONS FOR USE

1 - Lift the press.
2 - Press the button (B2) and simultaneously press the extractor disk (B1) to move it to
the lower part of the basin.
3 - Insert a disk in the basin (B2), fill it with enough ground food product (do not exceed
basin capacity) and cover it with another disk.
4 - Lower the press and slightly press ground food product with the press.
5 - Lift the press , press the button (B2) and remove pressed food product.
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
Unit of measure
mm
mm
mm
kg
Counter installation
- 19 -
F/10 HAMBURGER
PRESS
F/10
100
300x190x285
280x210x340
5
English language
GB