Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Anleitung_NFF_1200_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Layout and items supplied
(Figures 1 – 2)
1. Dust bag
2. Saw bench
3. Angle adjustment lever
4. Saw blade
5. ON/OFF switch
6. Folding bottom frame
7. Wrench
8. 4x Allen keys
For use as a bench circular saw
9. Push stick
10. Angle stop
11. Saw blade guard
12. Splitter
13. Knurled screw for cutting height
14. Parallel stop
For use as a crosscut and miter saw
15. Saw blade guard
16. Handle
17. Machine head
18. Stop rails
19. Turntable
20. Chip box
2. Proper use
The bench, crosscut and miter saw is designed in
bench circular saw mode for the slitting and cross-
cutting (only with the cross stop) of all types of timber,
commensurate with the machine's size. The machine
is not to be used for cutting any type of round wood.
In crosscut and miter saw mode it is designed for
cross-cutting wood and plastic, commensurate with
the machine's size. The saw is not designed for
cutting firewood. The machine is to be used only for
its prescribed purpose.
14.01.2009
11:10 Uhr
Seite 25
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
3. Safety Information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
4. Noise emission values
The sawʼs noise is measured in accordance with
DIN EN ISO 3744; 11/95, E Din EN 31201; 6/93,
ISO 7960 Annex A; 2/95. The machine may exceed
85 dB(A) at the workplace. In this case, noise
protection measures need to be introduced for the
user (ear-muffs).
Sound pressure level L
Sound power level L
„The quoted values are emission values and not
necessarily reliable workplace values. Although there
is a correlation between emission and immission
levels it is impossible to draw any certain conclusions
as to the need for additional precautions. Factors
with a potential influence on the actual immision level
at the workplace include the duration of impact, the
type of room, and other sources of noise etc., e.g.
the number of machines and other neighbouring
operations. Reliable workplace values may also vary
from country to country. With this information the
user should at least be able to make a better
assessment of the dangers and risks involved."
Vibration: 1,433 m/s
GB
Idling
87,6 dB
pA
100,6 dB
WA
2
25
Publicité
Table des Matières
