Using the juicer
IMPORTANT: Do not exceed the 3 minutes continuous use to avoid overheating the motor. Let the
motor rest for 15min. before reusing it.
Using the slicing discs
DANGER: Cutting injuries!
The
mixing
cutting blades are really
sharp! Be careful when
adding an accessory or
cleaning.
Never exceed the maximal
filling capacity of the bowl.
The appliance has a triple
safety lock on the bowl, the
cover
and
ensure to always assemble
correctly each part before
using the food processor.
blades
and
accessories;
1.
Insert the chopping bowl on the motor body
unit.
2.
Turn the chopping bowl clockwise to safely
lock it.
3.
Set the drive shaft into the shaft of the
chopping bowl.
4.
Insert the juicer body into the bowl.
5.
Turn the juicer filter clockwise until its
locking position.
6.
Plug the appliance into a power socket.
7.
Put half of an orange on the runner, select
speed 1 and press for 20 secondes.
8.
At the end of your preparation, follow these:
stop and unplug your appliance, retrieve the
juicer from the bowl and retrieve the bowl
from the unit.
Note: you can get 1L of juice without emptying
the bowl. Think of rinsing the juicer filter every
0.3L.
5
ENGLISH