Set Up And Use; Before First Use; Using The Chopping Bowl With Its Blades - Telefunken TK361 Mode D'emploi

SET UP AND USE

Before first use

✓ Remove any sticker, protective foil or cover on your appliance.
✓ Place your appliance on a flat and stable surface.
✓ Wash all acessories with dishwashing liquid and rinse them under warm water. Dry them with a
dried and clean towel.
✓ Speed variator:
a. Position 0: OFF position.
b. Position 1: continuous use at low speed. Do not exceed the 3 minutes continuous use to
avoid overheating the motor. Let the motor rest for 15 minutes before reusing it.
c. Position 2: continuous use at high speed. Do not exceed the 3 minutes continuous use to
avoid overheating the motor. Let the motor rest for 15 minutes before reusing it.
d. Position pulse: intermittent operation at high speed. Do not exceed the 3 minutes
continuous use to avoid overheating the motor. Let the motor rest for 15 minutes before
reusing it. You can hold intermittently or tight when using this function. In speed 2, this
function is useless.

Using the chopping bowl with its blades

DANGER: Cutting
injuries! The mixing
blades and cutting
blades are
sharp! Be careful
when adding
accessory or cleaning.
Never exceed
maximal
capacity of the bowl.
The appliance has a
triple safety lock on
the bowl, the cover
and accessories;
ensure to always
assemble correctly
each part
using the
processor.
really
an
the
filling
before
food
2
ENGLISH