Telefunken TK361 Mode D'emploi page 29

1. Insert the chopping bowl on the motor body unit.
2. Turn the chopping bowl clockwise to safely lock it.
3. Set the drive shaft into the shaft of the chopping bowl.
4. Two options following your desired preparation:
a.
Mixing and chopping
Insert the S/S cutting blade on the drive shaft inside the chopping bowl.
Add ingredients as follows:
Blade Max weight
N°11
b.
Mixing and kneading
Insert the mixing plastic blade on the drive shaft inside the chopping bowl.
Add your preparation into the bowl as follows:
Blade
N°10 700gr (flour & water
5. Put the cover on the bowl then turn clockwise to lock it.
6. Insert the food tube pusher set (4a + 4b + 4c) into the chimney of bowl cover. You can always
add ingredients during your prepping time by removing the food pusher.
7. Plug your appliance into a power socket.
8. Select your speed based on your recipe.
9. At the end of your preparation, follow these: stop and unplug your appliance, retrieve the
chopping bowl from the body unit and retrieve the bowl cover.
IMPORTANT: Do not exceed the max weight. Do not exceed the 3 minutes continuous use to
avoid overheating the motor. Let the motor rest for 15 minutes before reusing it.
Raw or cooked meats (cut in 2cm,
500gr
boneless and unnerved)
Soup, apple sauce
1L
500gr Vegetables (onions, celeris) cut
Max weight
Heavy dough (bread)
total weight)
1L Light dough (cakes) or sauces
IMPORTANT: The pin of pusher 4c must be always inserted
into the bowl to start its system, if not, the machine
will not work.
Preparation
Preparation
3
Speed Time
2 or P 50 sec.
2 or P 40 sec.
2 or P 1 min.
Speed Time
1 1 min.
1 40 sec.
ENGLISH