Telefunken TK361 Mode D'emploi page 23

• DO NOT USE THE COVER TO START OR STOP THE APPLIANCE,
ALWAYS USE THE SPEED VARIATOR.
• DO NOT FORCE THE SAFETY LOCKING SYSTEM TO AVOID ANY
DAMAGE.
• DO NOT EXCEED THE MAXIMAL MARKING.
• DO NOT OPERATE YOUR APPLIANCE WHEN EMPTY.
• THE APPLIANCE MUST NOT BE IMMERSED.
• IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY
QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.
• REGARDING THE INFORMATION FOR OPERATING TIMES AND
ACCESSORIES SETTING, THANKS TO REFER TO THE BELOW
PARAGRAPH OF THE MANUAL.
• ALWAYS UNPLUG THE APPLIANCE AND LET IT COOL DOWN
COMPLETELY BEFORE ANY CLEANING OPERATION.
• NEVER IMMERSE IN WATER OR ANY OTHER LIQUID THIS
APPLIANCE, ITS ELECTRIC PLUG AND CORD.
• FOR THE DETAILS ON HOW TO CLEAN SURFACES IN CONTACT
WITH FOOD, PLEASE SEE SECTION "CLEANING AND
MAINTENANCE".
• THIS APPLIANCE MUST BE EARTHED.
• ENSURE TO CHECK THAT THE VOLTAGE MARKED ON THE
RATING PLATE MATCHES TO YOUR LOCAL SUPPLY. IF NOT THE
CASE, DO NOT USE THE APPLIANCE AND SEEK FOR EXPERT
ADVICE.
• DO NOT LET THE SUPPLY CORD HANG OVER EDGE OF TABLE OR
COUNTER.
SAFETY CAUTIONS
ENGLISH