Status Indicators; Maintenance And Servicing; Maintenance And Cleaning - Bosch SmartphoneGrip BSP3200 Notice D'utilisation D'origine

The charging voltage is switched off when you remove the
smartphone from the holder.
Charging via USB
If your smartphone does not have an inductive charging
function, you can charge your smartphone via the USB
port (3). To do so, open the USB cap and connect a separate
USB cable (not included in the scope of delivery) to the Mi-
cro-A/B USB port.
Pay attention to the type of plug required for your smart-
phone when purchasing the USB cable.

Status Indicators

The status LED (9) indicates the following statuses with dif-
ferent colours and lighting patterns.
Status
Charging via USB
Inductive charging starts
Inductive charging
Fully charged
Error message
The following alarm states are detected and will lead to the
inductive charging process being interrupted:
– Detection of foreign objects, e.g. coins, keys and other
metallic objects
– Temperature alarm
If the SmartphoneGrip is outside of the operating temper-
ature range, the status LED (9) will light up red and the
charging process is interrupted. The charging process will
resume as soon as the SmartphoneGrip is back within the
operating temperature range.
– Overvoltage alarm at voltages above 6 V
– Undervoltage alarm at voltages below 4.2 V

Maintenance and servicing

Maintenance and cleaning

Use a soft cloth dampened only with water for cleaning. Do
not use cleaning products of any kind.
Have all repairs performed only by an authorised bike
u
dealer.
Do not clean any of the components with pressurised water.
Transport
If you transport your eBike attached to the outside of
u
your car, e.g. on a bike rack, remove the Smart-
phoneGrip and the eBike battery to avoid damaging
them.
After-sales service and advice on using products
If you have any questions about the eBike system and its
components, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Bosch eBike Systems
Behaviour
LED lights up blue.
LED flashes yellow 3 times.
LED lights up yellow.
LED lights up green.
LED flashes red.
Disposal
The drive unit, on-board computer incl. operat-
ing unit, battery, speed sensor, accessories
and packaging should be disposed of in an en-
vironmentally correct manner.
Check that your personal data has been deleted from the
device.
Do not dispose of eBikes and their components with house-
hold waste.
In accordance with Directive 2012/19/EU
and Directive 2006/66/EC respectively, elec-
tronic devices that are no longer usable and de-
fective/drained batteries must be collected
separately and recycled in an environmentally
friendly manner.
Please return Bosch eBike components that are no longer
usable free of charge to an authorised bicycle dealer or to a
recycling facility.
Subject to change without notice.
English – 3
0 275 008 3SG | (28.02.2022)