3
Product description & specification
3.1
Chassis
The basic chassis consists of an axle with a lifting mast and two swivel castors.
An hydraulic system is built into the lifting mast, which is used to lift and lower the gripped drums. On the user side there
are operating controls to lift and lower the drums.
The swivel castors are equipped with brakes to prevent the drum lifter rolling away.
One of the three wheelbase models S, B or W completes the chassis. The forks for Models S and B have fixed castors,
the forks for Model W have swivel castors.
3.1.1
Model S
Fig. 25: narrow forks
This model is suitable for use with drums which are:
standing on sump pallets which are accessible underneath or on pallets
g
3.1.2
Model B
Fig. 26: wide forks
241109_Secu-Ex_004_INT
Chassis
Product description & specification
47 / 144