Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing Extension Brackets to Universal Adapter Brackets
Skip to step 3-1 on page 9 if not installing exten-
3
sion brackets.
Remove four 1/4-20 self-tapping screws to detach
display brackets from universal adapter bracket
(B) using 5 mm allen wrench (I) as shown.
1/4-20 SELF-
TAPPING SCREWS
HOLES
For 65" Panasonic Display:
NOTE: Mount through holes fi rst, then secure
SLOTS
through slots for proper alignment.
L
Attach Panasonic extension brackets (L) through
holes indicated to universal adapter bracket (B)
with four 1/4-20 self-tapping screws using 5 mm
allen wrench (I) as shown. Then secure with
1/4-20 self-tapping screws (N) through slots
indicated.
N
SLOTS
HOLES
For 65" Sharp Display:
HOLE
NOTE: Mount through holes fi rst, then secure
through slots for proper alignment.
M
Attach Sharp extension brackets (M) through holes
indicated to universal adapter bracket (B) with two
M5 fl athead screws using 5 mm allen wrench (I) as
shown. Then secure with two 1/4-20 self-tapping
SLOT
screws (N) through slots indicated.
N
8 of 70
ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12
Publicité
Table des Matières
