peerless-AV SA771PU Installation Et Montage page 12

VESA 200 x 200 or VESA 200 x 100 Mounting Pattern
Remove four 1/4-20 x .6" screws using 5 mm allen wrench
4
(I) and loosen two 1/4-20 x 1.25" screws 1/2 turn to allow for
display bracket adjustment.
4-1
Remove four 1/4-20 self tapping screws to detach display brackets from outer mount holes of universal adapter
bracket (B) using 5 mm allen wrench (I) as shown in fi gure 4.1. Reinstall four 1/4-20 self tapping screws to secure
display brackets to inner set of mounting holes on universal adapter bracket (B) as shown in fi gure 4.2.
1/4-20 SELF
TAPPING SCREWS
To prevent scratching the display, set a cloth on a
fl at, level surface that will support the weight of the
display. Place display face side down and place
universal adapter bracket (B) onto display.
OUTER
MOUNTING
HOLES
Display
BRACKETS
B
fi g. 4.1
1/4-20 x .06" SCREWS
1/4-20 SELF
TAPPING SCREWS
B
12 of 70
ISSUED: 10-30-09 SHEET #: 095-9299-11 03-22-12
1/4-20 x 1.25" SCREWS
INNER
MOUNTING
HOLES
Display
BRACKETS
B
fi g. 4.2