VINCENT PHO-8 Manuel D'utilisation page 19

1
2
3
1. POWER LED of the PHO-8ps
This LED is lit as long as the power supply PHO-
8ps is connected to a vivid power grid (mains
socket) and the device is switched on (5).
2. POWER LED of the PHO-8
This LED is lit as long as the PHO-8 is connected
to the power supply PHO-8ps that is switched on
and ready for use.
FRONT VIEW
3. MC/MM: pickup type switch
At this switch the type of record player pickup
system has to be selected to adapt the phono pre-
amplifier PHO-8 to that system. See section
"Setting the type of pickup system".
Vincent
19