NOCO Genius G750 Manuel D'utilisation page 3

Mode
Standby
12V
NORM
6V
NORM
Press & Hold
Using 6V NORM. [Press & Hold]
6V NORM charge mode is designed for 6-volt lead-
acid batteries only, like Wet Cell, Gel Cell, Enhanced
Flooded, Maintenance-Free and Calcium batteries.
Consult the battery manufacturer before using this
mode.
CAUTION. THIS MODE IS FOR 6-VOLT LEAD-ACID
BATTERIES ONLY.
Connecting to the Battery.
Do not connect the AC power plug until all other
connections are made. Identify the correct polarity of
the battery terminals on the battery. The positive battery
terminal is typically marked by these letters or symbol
(POS,P,+). The negative battery terminal is typically
marked by these letters or symbol (NEG,N,-). Do not
make any connections to the carburetor, fuel lines, or
thin, sheet metal parts. The below instructions are for
Explanation
In Standby mode, the charger is not
charging or providing any power to the
battery. Energy Save is activated during
this mode, drawing microscopic power
from the electrical outlet. When selected,
an orange LED will illuminate.
No Power
For charging 12-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free
and Calcium batteries. When selected, a
white LED will illuminate.
14.5V | 750mA | 2-30Ah Batteries
For charging 6-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free
and Calcium batteries. When selected, a
white LED will illuminate.
7.25V | 750mA | 2-30Ah Batteries
2