Panasonic WV-CU161C/B Mode D'emploi page 7

t Wiper/Auxiliary 1 Button (WIPER/AUX1)
Pressing this button will turn the housing wipers on or
off for cameras provided with this function. Pressing this
while the SHIFT indicator is lit will turn on or off the
AUX1 function controlling accessories that are connect-
ed to the camera or the specified receiver.
The indicator next to the respective button is lit while
the wiper or AUX1 operates.
y Defroster/Auxiliary 2 Button (DEF/AUX2)
Pressing this button will turn the housing defroster on or
off for cameras provided with this function. Pressing this
while the SHIFT indicator is lit will turn on or off the
AUX2 function controlling accessories that are connect-
ed to the camera or the specified receiver.
The indicator next to the respective button is lit while
the defroster or AUX2 operates.
u Joystick Controller (UP/DOWN/L/R)
This joystick manually operates the Pan/Tilt Head and
moves the cursor in the Setup menu on the monitor
screen.
UP: Upward
DOWN: Downward
L: Left
R: Right
i Focus Buttons (FOCUS: NEAR/FAR)
These buttons are used to adjust the lens focus of cam-
eras equipped with the specified lens.
When these buttons are pressed simultaneously, the
lens focus is set automatically when the specified cam-
era is used.
o Zoom/Iris Buttons
(ZOOM: WIDE/TELE, IRIS: CLOSE/OPEN)
These buttons are used to zoom the camera image in
(TELE) and out (WIDE).
The lens iris is adjusted by pressing the OPEN or
CLOSE button while the SHIFT indicator is lit. Hold
down these buttons simultaneously for 1 second while
the SHIFT indicator is lit in order to reset the iris back to
the factory setting.
!0 Preset/Set/Program Preset Button
(PRESET/SET/PROGRAM PRESET)
PRESET: This button is used combined with the numer-
ic buttons to move a specific camera to a preset
position.
SET: This button is used to execute the currently high-
lighted setting in the Setup menu.
PROGRAM PRESET: Pressing this while holding down
the CAMERA SETUP/SETUP/PROGRAM button will
program a preset position.
!1 Numeric Buttons (0-9)
These buttons are used for the numeric input of preset
numbers and for executing parameters on the Camera
Setup menu.
!2 Home/Escape Button (HOME/ESC)
HOME: This button is used to return a specific camera
to the home position.
ESC: This button is used to escape from the currently
highlighted selection and return to the previous
menu of the Setup Menu.
!3 Shift button (SHIFT)
Pressing this button will enter or quit the shift mode.
While the SHIFT indicator is lit, press or hold down a
button that is assigned to a special function in the shift
mode in order to activate or deactivate the function.
!4 Alarm Reset/Suspend Button
(ALARM RESET/SUSPEND)
Pressing this button while the alarm function is activat-
ed will reset the system alarm.
Pressing this button while the SHIFT indicator is lit will
activate or deactivate the alarm suspension mode.
The LED next to the button is lit while the alarm suspen-
sion mode operates.
!5 Camera Setup/Setup/Program Button
(CAMERA SETUP/SETUP/PROGRAM)
Pressing this button for 2 seconds or more will open or
close the Camera Setup menu.
Pressing this button for 2 seconds or more while the
SHIFT indicator is lit will open or close the controller
setup menu. The indicator next to the respective button
is lit while the setup window is operated.
This button is also used to program the camera patrol
learning and preset position functions.
!6 Slow/Camera Function Button
(SLOW/CAMERA FUNCTION)
The pan/tilt speed will decrease if this button is pressed
while the joystick controller is moved.
Pressing this combined with the numeric buttons while
the SHIFT indicator is lit will execute the camera func-
tions.
7