Camera Setup - Panasonic WV-CU161C/B Mode D'emploi

CAMERA SETUP

The camera setup operations are available using the WV-
CU161C controller on the CAMERA SETUP menus.
For further information, refer to the Operating Instructions
for the individual combination cameras.
G Camera Setup
1. Hold down the CAMERA SETUP/SETUP/PROGRAM
button for 2 seconds or more to access the Camera
Setup menu. The CAMERA SETUP indicator lights up.
CAMERA
SETUP
SETUP
PROGRAM
2. Select an item and parameter by pressing numeric but-
tons 2, 4, 6 and 8.
1
4
7
HOME
ESC
3. Press the PRESET/SET/PROGRAM PRESET button to
execute the parameter or enter a submenu.
PRESET
PROGRAM
PRESET
4. Press the HOME/ESC button to return to the previous
menu.
HOME
5. Hold down the CAMERA SETUP/SETUP/PROGRAM
button for 2 seconds or more to complete the Camera
Setup.
CAMERA
SETUP
SETUP
(Example of Camera Setup menu)
*** SET UP MENU ***
PRESET 1*
MAP
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE AUTO PAN
AUTO PAN KEY SEQ
DIGITAL FLIP OFF
LOCAL/REMOTE LOCAL
SPECIAL1
CAMERA
RS485 SET UP
2 3
5 6
8 9
PRESET
0
SET
PROGRAM
PRESET
SET
ESC
PROGRAM
Notes:
• To display the special menu, move the cursor to [SPE-
CIAL] on the setup menu and simultaneously hold down
numeric buttons 4 and 6 for 2 seconds or more.
• To restore all default values, move the cursor to [CAM-
ERA RESET]* on the setup menu and simultaneously
hold down buttons 4, 5 and 6 for 2 seconds or more.
• The menu for restoring the camera defaults differs
depending on the camera type.
For example, [SPECIAL] for the WV-CS654, [SPECIAL
2] for the WV-CS854, and [END] for fixed cameras.
• If camera setup is started using the buttons on the cam-
era, then all future setup operations must be performed
with the buttons.
If camera setup is started using the System Controller,
then all future setup operations must be performed
using the same controller.
• For further information,
Instructions for the selected camera.
G Keys Used in the Camera Setup Menu
CAMERA SETUP/SETUP/PROGRAM button:
Hold down this button for 2 seconds or more to display
the camera SETUP MENU.
CAMERA
SETUP
SETUP
Numeric buttons:
To move the cursor.
To select modes.
PRESET/SET/PROGRAM PRESET
To enter a submenu.
PRESET
PROGRAM
PRESET
HOME/ESC button:
To return to the previous menu.
HOME
refer to the Operating
PROGRAM
8
2
4 6
SET
ESC
31