I Operation Of Combination Camera - Panasonic WV-CU161C/B Mode D'emploi

I Operation of Combination Camera

It is necessary to set up the combination camera before
operating it. For further setup information, refer to the
Operating Instructions for the combination camera (See
page 30). You can also set it up from the Camera Setup
menu during operating the system.
G Moving to a Preset Position
The combination camera is moved to a position preset
beforehand.
Select a preset number using the numeric buttons, and
then press the PRESET/SET/PROGRAM PRESET button.
1
4
7
HOME
ESC
The picture of the camera in that position appears on the
monitor.
G Moving to the Home Position
The combination camera is moved to the home position
preset beforehand.
Press the HOME/ESC button.
The picture in that position appears on the monitor.
26
2 3
PRESET
5 6
8 9
SET
PRESET
PROGRAM
0
PRESET
SET
PROGRAM
PRESET
HOME
ESC
G Auto Pan
The combination camera starts a specific panning mode
preset beforehand.
1. Press the AUTO/B/W/PATROL STOP button.
AUTO
B/W
PATROL STOP
The auto panning function is activated.
The picture appears on the monitor.
The following functions may be also available depend-
ing on the combination camera.
AUTO PAN ON or functions set in the combination
camera: Press the numeric button 1 and then press this
button.
AUTO SORT ON: Press the numeric button 2 and then
press this button.
AUTO SEQ ON: Press the numeric button 3 and then
press this button.
RANDOM PAN ON: Press the numeric button 4 and
then press this button.
For further information, refer to the Operating Instruc-
tions for the combination camera.
2. To stop auto pan, move the joystick.
L
UP
R
DOWN