Ec Declaration Of Conformity - Walter LT63006S Notice D'utilisation

We,
WALTER WERKZEUGE SALZBURG GmbH, Gewerbeparkstrasse 9, 5081 Anif, Austria
declare that the design and construction of the following machine, in the form supplied by us,
comply with the basic health and safety requirements of the appropriate EC directives.
This declaration covers the machine only in the condition in which it was supplied by us. It
does not cover parts subsequently fitted by the user or modifications made after purchase.
Product description / function:
Type / model identifier:
Serial number / Lot number:
Trade name:
Appropriate EC directives:
- EC – Machinery directive 2006/42/EC
- EC – Directive on electromagnetic compatibility (EMC) 2004/108/EC
- Directive 2011/65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Applicable harmonised standards:
EN 60745-1:2009+A11:2010; EN 60745-2-5:2010;
EN 55014-1:2006+A1:2009+A2:2011; EN 55014-2:1997+A1:2001+A2:2008;
EN 61000-3-2:2006+A1:2009+A2:2009; EN 61000-3-11:2000; EN 50581:2012
Leitung Produktmanagement
und Bevollmächtigter der
Technischen Dokumentation
630355_Anleitung_D,GB,FR.indb 53
EC-Declaration of Conformity
Anif, 01-01-2016
Ben Shields
Technical documentation is available from:
WALTER WERKZEUGE SALZBURG GmbH,
Gewerbeparkstrasse 9, 5081 Anif, Austria
1200W Plunge Saw
LT63006S
11-576 – 2016-01
WALTER Plunge Saw - 1200W
Mag. Bart Duquène
Senior Product Manager
53
11.12.15 11:07