Maintenance And Troubleshooting; Changing The Saw Blade - Walter LT63006S Notice D'utilisation

Maintenance and troubleshooting

Changing the saw blade

Caution: Switch the machine off and disconnect from the
mains before changing the saw blade.
Caution: Risk of injury!
Wear protective gloves
- Select the blade changing mode as
described above.
- Press the locking pin (3) and lower
the saw until it stops in the blade
changing position. When the locking
pin is released the saw will stay in
this position.
630355_Anleitung_D,GB,FR.indb 48
3
48
6
11.12.15 11:07