Walter LT63006S Notice D'utilisation page 47

Using the Plunge Saw
Hold the plunge saw on the handles
(1 & 2) and ensure you take a stable
stance.
Switch the machine on and allow the
machine to reach full speed before
starting the cut.
- Push the saw downwards.
- Guide the saw along the cut without
using any excess pressure.
- Choosing a suitable working
speed avoids causing the saw
blade to overheat or the melting of
workpieces made of plastic.
Cut display
- When performing straight cuts (0°)
align the line of cut to the '0' mark.
- When performing mitre cuts (45°)
align the line of cut to the '45' mark.
630355_Anleitung_D,GB,FR.indb 47
2
47
1
0°
45°
11.12.15 11:07