Walter LT63006S Notice D'utilisation page 41

Connecting the parallel guide to the Plunge Saw
- Place the saw on the parallel
guide. Ensure that the grooves are
positioned correctly.
- Turn and hold the anti-kickback
knob clockwise and press the
plunge saw on to the parallel guide.
- The parallel guide will lock in place
thus reducing the possibility of injury
due to kickback.
- Pull the parallel guide adjustment
knob and turn clockwise to secure
the machine to the parallel guide.
This process is especially important
when performing mitre cuts.
- The position of the saw on the
paralle guide can be adjusted using
the fixing screws (16).
630355_Anleitung_D,GB,FR.indb 41
17
18
16
41
16
11.12.15 11:06