Usage - Metcal BVX-200 Guide De L'utilisateur

1.6 Usage

The Metcal Fume Extraction System is a portable, two-station filtration system
for the removal of fumes, light dust or vapors at the work place. The filter set
supplied with the filter unit depends on the model ordered.
Model BVX-201 supplied with a pre-filter and a main filter. The main-filter is a
combo-filter consisting of a HEPA filter with an efficiency of 99.95% at 0.3
micron and an activated carbon filter. This model is designed for applications
such as solder fumes from solder irons, solder pots, etc.
Model BVX-203 supplied with a pre-filter and a deep-bed gas filter (activated
carbon). This model is designed for applications such as cleaning with
solvents, conformal coating, etc.
WARNING!
Consult your "safety department" when using the unit on flammable gases. This unit is
not explosion safe and only used for the extraction of vapors, which have
concentration levels well below the lower explosive limits.
Pre-filter mat
HEPA w/ Carbon
Filter
Model BVX-201
OK International ¥ Copyright © All Rights Reserved ¥ BVX-200 Rev 01-15-04
Airflow
Model BVX-203
6
Pre-filter mat
Deep-bed
Carbon Filter