user's instructions
MontAGe - connection
7. Connect the yellow-green wire, which comes
from the motor, to the earth screw on the inside
of the canopy (See figure 5).
8. Connect the yellow-green wire, which comes
from the rod, also to the earth screw on the
inside of the canopy (See figure 5).
9. Remove the 2 screws. Insert the blades into
the appropriate slots and festen them with
the screws. Be sure that all the blades are
tightened with three screws (See Figure 6).
Yellow/Green
Yellow/Green
Blue
Blue
Black
Brown
Black
Motor
27
Down rod
Yellow/
Green
Mounting
Canopy
Plate
Yellow/Green
Earth
Neutral
Line
N
L