Firmware Update - Ingeteam INGECON SUN 1Play HF Manuel D'utilisateur

Masquer les pouces Voir aussi pour INGECON SUN 1Play HF:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

Firmware update

Firmware update
This document explains the procedure for updating the firmware of the unit.
Update process
To load firmware to the unit the memory card must be SD HC (High Capacity).
Do not load the firmware in the rain. To insert the memory card in the inverter it is necessary to
release the card reader protector, thus the unit protection rating for external elements is diminished
until said element is reinstalled.
1.
Check the version of firmware installed in the inverter using the display, accessing Main menu > Inverter
data > FW version.
2.
The firmware is updated using a SD HC type memory card (not supplied by Ingeteam). There must be a
card of this type in FAT32 format. The card must be formatted and must not contain any files.
3.
To download the latest firmware available go to the Ingeteam website (www.ingeteam.com). On the
website, access Energy > PV energy, go to the inverter model section and then to the Downloads area. Here you
will find the .rar or .zip file containing the files necessary to load the firmware.
4.
Extract the two files included in the file you have downloaded with extensions .hex and .sdc, to the root
directory of the memory card. The name of the file shall be of the type XXXXXXX_z.hex, where _z indicates the
version of the file. The first version will be _ and will continue with _A, _B, etc.
5.
With the inverter running, open the cover of the card reader and insert the SD card.
6.
In a few seconds the inverter automatically recognises the firmware and starts the update process. The
inverter disconnects from the grid causing a reason for shutdown due to firmware update. In the event a
problem appears in this step, read the section "Troubleshooting in the firmware loading process" that appears
subsequently.
7.
A message will be displayed on screen confirming that the firmware is being loaded. Do not remove the
memory card.
8.
The main menu will be displayed once the firmware has been loaded. At that moment you can remove the
SD card by pressing it gently.
ABF2012IQM02_ - User manual
Ingeteam
DE
EN
ES
FR
IT
PT
7

Publicité

Table des Matières
loading

Table des Matières