Publicité
Les langues disponibles
Les langues disponibles
Fig. 1: NanoProp 5000
Fig. 1: Exploded parts diagram NanoProp 5000
1.
Filter basket
2.
Rotor assembly
3.
Motor
4.
Vibration buffer
5.
Fixing nut
5. Set Up
The pump can only be operated under water. The maximum depth is 1 m. The pump should be
mounted at least 10 cm below the water surface to avoid air to be sucked in. The pump is a pure
current pump. No piping or hoses may be attached to it in order to lift water up.
Sucker: To fix the pump at the aquarium glass, the sucker has to be mounted first. The place
where it shall be mounted has to be cleaned – preferably with a blade cleaner. We recommend to
use the Aqua Medic Scraper. Now the sucker is placed and pressed to the glass. The fixing nut (8)
is turned until a vacuum is created and the sucker is fix. The holder with the pump can now be
mounted and secured by the fixing nut (5). The oscillation buffer is attached in 2 versions: for one
and for 2 pumps.
6.
Ball joint
7.
0-ring
8.
Fixing nut
9.
Sucker plate
10.
Rubber sucker plate
7
Publicité
