Velleman ADVANCED PERSONAL SCOPE APS230 Manuel D'utilisation page 32

Meter readout
Fig 23
Fig 25
32
Fig 22
CH1 CH2
A ps 2 3 0 A D VA N CE D Per s o n al S c o pe
Use the 'meter' key (fig. 22) to select the
desired readouts.
Setting up the measurement readouts
'channel 1':
1. Pressing the 'meter'-key selects the first
2. Press the cursorkeys to highlight the desired
3. Pressing the 'meter'-key selects the second
4. Press the cursorkeys to highlight the desired
5. Pressing the 'meter'-key selects the third
6. Press the cursorkeys to highlight the desired
7. Pressing the 'meter'-key selects the fourth
Fig 24
8. Press the cursorkeys to highlight the desired
9. Pressing the 'meter'-key returns to scope
Fig 26
READOUT SET-UP
readout location.
readout function for meter 1 readout. (Fig. 23)
readout location
readout function for meter 2 readout. (Fig. 24)
readout location
readout function for meter 3 readout. (Fig. 25)
readout location.
readout function for meter 4 readout. (Fig. 26)
mode.
Remark : Certain screen layoutsfeature
less readouts.
Follow the same procedure for Channel 2.
TM