Using The Included Accessories - Miele SCAE0 Instructions D'utilisation

Activating the exhaust filter change
indicator
Depending on the model, one of the
following standard exhaust filters is
installed (see fig. 8).
a AirClean Filter
b Active AirClean 50 Filter (black)
c HEPA AirClean 50 Filter (white)
^ Open the dust compartment lid and
raise until it clicks into place
(see fig. 9).
^ Remove the marker strip (see fig. 10).
^ Press the exhaust filter change
indicator ~ (see fig. 11).
^ After about 10-15 seconds, a small
red marker will appear in the
left-hand side of the display
(see fig. 12).
^ Close the dust compartment lid until
it clicks into place. Take care not to
catch the dustbag in the lid.
How the exhaust filter change
indicator works
The exhaust filter change indicator
displays the usable life of the exhaust
filter. The indicator will turn fully red
after approx. 50 hours of operation,
which is equivalent to one year of
average use (see fig. 13).

Using the included accessories

(see fig. 14)
The following accessories are included:
a Dust brush
For cleaning moldings, decorative or
carved items, etc.
The head of the brush swivels and
can be turned to the best cleaning
position.
b Upholstery tool
For cleaning upholstery, mattresses,
cushions, curtains, covers etc.
c Crevice nozzle
For cleaning in folds, crevices and
corners.
d Accessory clip for the included ac-
cessories (see fig. 15)
Position the accessories as indicated
with the symbols on the accessory
holder.
^ Insert the accessory holder either on
the hand piece at the handle or on
the hose connector of the vacuum
cleaner.
Floor brush AllTeQ (see fig. 16)
(depending on model)
Also suitable for vacuuming stairs.
,
For your own safety, always
vacuum stairs from bottom to top.
en
11