Using The Accessories Supplied - Miele Compact C1 Mode D'emploi

en-US
Please always follow the flooring
manufacturer's cleaning and care in-
structions.
Vacuum carpets and rugs with the
brush retracted:
 Press the foot switch .
Clean hard flooring which is not sus-
ceptible to scratching, and flooring with
gaps or deep crevices in it with the
brush protruding:
 Press the foot switch .
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to maneuver (see "Use – Regulating
the suction power").
Activating the TimeStrip® exhaust fil-
ter change indicator on the exhaust
filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (Fig.
09).
a AirClean
b AirClean Plus 50 (light blue)
c Active AirClean 50 (black)
d HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with ex-
haust filter c or d, you need to activate
the TimeStrip® exhaust filter change in-
dicator.
 Press the release button on the re-
cessed grip and raise the dust com-
partment lid as far as it will go (Fig.
10).
14
 Remove the indicator strip (Fig. 11).
 Press the TimeStrip® exhaust filter
change indicator (Fig. 12).
After approx. 10–15 seconds a thin red
line will appear in the left-hand side of
the display (Fig. 13).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the filter
bag when doing so.
How the TimeStrip® exhaust filter
change indicator works
The TimeStrip® exhaust filter change
indicator shows the remaining func-
tional life of the exhaust filter. After ap-
prox. 50 operating hours, or approx.
one year of average use, the display will
be completely filled with red (Fig. 14).

Using the accessories supplied

(Fig. 15 + 16)

Dusting brush

Upholstery nozzle

Crevice nozzle

Accessory holder for the three
accessories supplied
Symbols on the holder show where to
attach the different accessories.
 Attach the accessories holder to the
top or bottom of the suction wand
when required (Fig. 16).
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
– AllergoTeQ floorhead