Using The Supplied Accessories; Use - Miele Boost CX1 Mode D'emploi

 Press the TimeStrip® filter change
indicator on the HEPA AirClean
exhaust filter (Fig. 09).
After approx. 10–15 seconds a thin red
line will appear in the left-hand side of
the display (Fig. 10).
 Fit the exhaust filter compartment
flap carefully in the bottom of the
exhaust filter compartment and close
the flap, making sure it clicks into
position (Fig. 11).
How the TimeStrip® exhaust filter
change indicator works
The TimeStrip® exhaust filter change
indicator shows the remaining
functional life of the exhaust filter. After
approx. 50 operating hours the display
will be completely filled with red (Fig.
12). 50 operating hours equates to
approximately one year of use.

Using the supplied accessories

(Figs. 13 + 14)
 Dusting brush
For cleaning skirting boards, as
well as ornate, carved, or
particularly delicate objects.
The head can be swivelled to
adjust the angle.
 Upholstery nozzle
For cleaning upholstery,
mattresses, cushions, curtains,
etc.
 Crevice nozzle
For cleaning in folds, crevices, or
corners.
 Accessories holder for the
above accessories
Symbols on the holder show
where to attach the different
accessories.
 Attach the accessories holder to the
connector on the handle if required.
Make sure it clicks into position (Fig.
14).

Use

Adjusting the telescopic suction tube
(Fig. 15)
One part of the telescopic suction tube
is packed inside the other, and it can be
adjusted to suit your height for
comfortable vacuuming.
 Grasp the release mechanism and
adjust the telescopic suction tube to
the required length.
en-CA
37