Voice Guidance; Lcd Contrast - Topcom AXISS 830 Manuel D'utilisateur

Topcom Axiss 830

7.2 Voice guidance

The Axiss 830 has a voice guided menu and will
also repeat every dialed digit by voice.
You can select out of six different voice languages
(English, French, German, Spanish, Swedish,
Dutch) or you can disable the voice.
• Press .
• Press 7 x to select "VOICE".
• Press .
• Now use and
different languages.
• Choose the language and press
confirm.
If you don't want voice guidance you can
select "VOICE NO".
• Press to leave the menu.

7.3 LCD contrast

You can set the LCD display contrast to 5 different
levels :
• Press .
• Press to select "LCD CONTRAST".
• Now use and
• Press to confirm.
• Press to leave the menu.
7.4 Enter the time and date
When you have a subscription to the Caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone's clock will be set
automatically.
• Press .
• Press 1 x to select "ENTER TIME/DATE".
• Press .
• Now use and
• Press to confirm.
• Use and to change the minutes.
• Press to confirm.
• Use and to change the month.
• Press to confirm.
• Now use and
• Press to confirm.
• Press to leave the menu.
6
to navigate through all
to
to select the best level.
to change the hour.
to change the date.
7.5 Set the area code
When you have a subscription to the Caller ID
service it can be necessary in some countries to
enter your area code. When the telephone
receives a Caller ID it will remove the entered area
code from the incoming number.
You can set up to 5 digits for the area code.
• Press .
• Press 1 x to select "LOCAL AREA
CODE".
• Press to enter the settings.
• Now use and
• Press to move to the next digit.
• Repeat this sequence until all digits are set.
Leave unused digits as "-".
• Press to leave the menu.
7.6 Set the dial mode – Pulse or Tone
(DTMF)
The Axiss 830 can dial in Tone (DTMF) or Pulse
mode. By default the telephone is set to Tone
(DTMF) mode.
• Press .
• Press 3 x to select "SET DIAL MODE".
• Press to enter the settings.
• Now use or
"PULSE" and "TONE".
• Press to confirm.
• Press to leave the menu.
7.7 Set the flash time
The R-key (flash) is used for services like 'Call
waiting' (if this service is provided by your
telephone company) or to transfer calls when the
telephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different. The telephone supports 3 possibilities :
100, 300, 600 msec.
• Press .
• Press 4 x to select "SET FLASH TIME".
• Press to enter the settings.
• Now use or
time.
• Press to confirm.
• Press to leave the menu.
to change the digit.
to toggle between
to select the desired flash
Topcom Axiss 830