Operation - Snapper XD 1696871 Guide D'utilisation

OPERATION

STARTING THE SNOW SHOVEL (See Figures 6-7)
W A R N I N G
In order to avoid serious injury, the operator and unit must be in a stable position when starting the snow shovel.
Follow this sequence exactly in order to start the snow shovel.
• Open the small cover (1) for the safety key, and insert the key (2) into the plug.
• Verify that the battery pack is inserted into the battery compartment.
• Press and hold the lock-out button.
• While holding the lock-out button, press and hold the trigger switch.
• Hold the handles and begin to use the snow shovel.
NOTE: The Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once trigger is pressed
and unit is started, release the lock-out button.
STOPPING THE SNOW SHOVEL (See Figure 7)
• Release the trigger switch.
• The lock-out button will pop out, and the snow shovel will stop.
(2)
(1)
Fig. 6
12
Trigger
Lock-out
Button
Fig. 7