Quick Start - i-tec THUNDERBOLT 2 Guide Rapide

Masquer les pouces Voir aussi pour THUNDERBOLT 2:

Table des Matières

Les langues disponibles

6. 1x Ethernet 10 / 100 / 1000 Mb/s GLAN RJ-45 port – for connection to the Ethernet network or to the

internet modem

7. 2x Thunderbolt™ 2 port – for connection of Thunderbolt™ devices (you will use one port for

connecting your Mac and the other one can be used for connection of other Thunderbolt™

devices)

8. 1x HDMI port – for connection of the monitor

9. 1x power input from the power adapter to the AC 110V / 230V grid

HARDWARE INSTALLATION (CONNECTION) OF THE DOCKING STATION TO THE MAC

1) Turn ON the Mac.

2) Connect the power adapter to the docking station and connect it to the AC 110V / 230V grid.

3) Connect the Thunderbolt™ cable to the Thunderbolt™ port on the back panel of the docking

station.

4) Connect the Thunderbolt™ cable to a free Thunderbolt™ port of your Mac.

5) The installation of the docking station and the ports will start automatically.

6) When the installation is completed we recommend turning the Mac OFF and ON.

Installation of the drivers in Mac OS X is automatic.

Quick Start

Table des Matières