Assembly Instructions - MTD Yard Machines MTDA13P Manuel D'utilisation

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
NOTE: The only assembly required for your trimmer is to
install the edge guide wheel, debris shield and adjust the
assist handle.
EDGE GUIDE WHEEL INSTALLATION
1. Position the edge guide wheel (A) to the front of the
motor housing as shown in Fig. 1.
2. Tighten the wing nut (B) firmly. (Fig. 2)
DEBRIS SHIELD INSTALLATION
1. Position the motor housing with string head carrier
facing up. (Fig. 3)
2. Slide debris shield over motor housing.
3. Secure it with 4 screws (C). (Fig. 4)

ASSEMBLY INSTRUCTIONS

A
Fig. 1
B
Fig. 2
www.mymowerparts.com www.mymowerparts.com
C
7
Fig. 3
C
Fig. 4