Pfannenberg 18310000004 Mode D'emploi page 12

3.6 Operation of the multicontroller
- Scroll out of the temperature display of the unit with the buttons
 or  through the four menus 'SETP', 'Lit ¯', 'Lit_' and 'Unit'.
SETP : Temperature setpoint
Lit ¯ : Maximum temperature
Lit _ : Minimum temperature
Unit : Display in °C or Fahrenheit
- Selection of a menu with the SET button, then
password input , then .
Adjustment of a value with  or .
-
Confi rmation of this value with SET . The value is not saved if the
-
button is pressed.
BACK
- Selection of a different menu with the buttons  or .
30s without input ->
Back to the temperature display
12
Alternating display:
Actual value
1s
Error
Temperature display
Menu Setpoint SET
Menu
SET
Limit value
Temp. too high
Menu
SET
Limit value
Temp. too low
SET
Menu Unit
If no button is pressed for 30 seconds: timeout -> return to the tem-
perature display of the unit.
*
The menu password comprises the following key combination:
After pressing the SET button, press then within two
seconds.
Actual value
1s
Status:
Status
1s
Error:
*
Menu Password
Display:
Input mode:
*
Menu Password
Display:
Input mode:
*
Menu Password
Display:
Input mode:
*
Menu Password
Display:
Input mode:
SET
< 2s
< 2s
. . . . . . . . . .
Start-up mode
Energy mode
Stop mode
Error number
1s
Value +1
Save
SET
parameter
Value -1
Do not save
BACK
parameter
1s
Value +1
Save
SET
parameter
Value -1
Do not save
BACK
parameter
1s
Value +1
Save
SET
parameter
Value -1
Do not save
BACK
parameter
Save
SET
parameter
Do not save
BACK
parameter
085 408 157