Brevi Lewis 518 Instructions D'utilisation page 26

Pull out the belt from the connection plate.
Pull out the harness.
Remove the shoulder belt from the axle.
Remove the axle.
Remove the harness buckle.
Pull out the three components (shoulder belt, axle and harness buckle) from the harness and place them and the harness
buckle into the back pocket.
Place the harness behind the cover and connect it to the connection plate.
INSTALLING WITH 3-POINT BELT
(Universal)
5
Place the child seat forward faicing on the veichle seat (in the direction of travel).
First pull out the belt from the belt retractor.
Diagonal belt through guide 1 and lap belt through the belt slot, then put them together through guide 3 slot.
NOTE: make sure that the diagonal seatbelt section runs over your child's shoulder bone, and not in front of his or her neck.
Lock the tip of the buckle into the vehicle seat buckle with a CLICK noise.
Follow the direction of arrow to tighten belt, and put redundant belt into belt retractor.
26