Brevi Lewis 518 Instructions D'utilisation page 23

FASTEN THE CHILD
Press the strap adjusting button and pull out the harness to the maximum length.
Open the safety buckle by pressing red button.
Place the child on the seat, lock the safety buckle and pull the adjustment belt to the right tightness.
Warning: it is important for the safety of the child to adjust the harness, so that there should be less than a finger gap between
the harness and child.
Note: the safety belt must not be loosened or twisted.
INSTALLATION AS GROUP I (9-18kg)
< 13 kg
INSTALLING WITH 3-POINT BELT
(Universal)
Place the child seat forward facing on the vehicle seat (in the direction of travel).
Pull the diagonal belt section throught belt guide 2.
Place the lap belt section in the red belt guide 3.
Pull out safety belt from the back to the side, lap belt section respectively from the belt guide 3 of the base.
23