Battery Replacement - TFA 14.1504 Instructions D'utilisation

TFA_No_14.1504_Anleitung_05/13
Radio-controlled grill and meat thermometer
7. Table stand and attachment
Receiver:
• To use the bracket as a clamp (for example on a belt),
insert the double-sided mounting aids into the upper
slots of the receiver.
• To use the bracket as a stand, put the double-sided
mounting aids into the lower, gently sloping slots.
The installation is successful if you hear a click.
Transmitter:
• Place the bracket for the flexible metal support into
the double-sided mounting aids on the transmitter.
The installation is successful if you hear a click. Take
the metal support and attach the two ends into the
holes provided on the turntable of the bracket. With
the turntable, you can now choose whether you want
to use the metal support to stand or to be mounted.
The turntable is properly adjusted when you hear a
click.
8. Care and maintenance
• Clean the instruments and the probe with a soft
damp cloth. Do not use solvents or scouring agents.
Protect it from moisture.
• Should water or steam enter the socket, it could
affect the contact with the probe. Dry the plug con-
nector with a cloth before you connect it to your
transmitter.
• Turn off the instruments after use.
• Remove the batteries if you do not use your instru-
ments for a long period of time.
• Keep the instruments in a dry place.

8.1 Battery replacement

• Change the batteries of the transmitter (REMOTE) or
the receiver (MAIN) when the battery symbol appears
on the display of the receiver.
• Please note: When the batteries are changed, the
contact between transmitter and receiver must be
restored – so always insert new batteries into both
units or start a manual transmitter search.
9. Troubleshootings
Problems
No display
20
04.06.2013 13:56 Uhr
Solutions
➜ Turn on the instruments
(at first the receiver and
afterwards the transmitter)
Seite 11
Radio-controlled grill and meat thermometer
➜ Ensure correct polarity of
➜ Change the batteries
➜ Change the batteries
Incorrect display
➜ Check the contact of the
➜ Reduce the distance
Display is flashing and
a beep tone is heard
→ no contact between
transmitter and reveiver ➜ Check if there is any
➜ Manual transmitter search
➜ Restart according to the
➜ Check the position of the
Temperature displayed
is too high
10. Waste disposal
This product has been manufactured using high-grade
materials and components which can be recycled and
reused.
Never dispose of empty batteries and
rechargeable batteries in household waste.
As a consumer, you are legally required to
take them to your retail store or to an
appropriate collection site depending on
national or local regulations in order to pro-
tect the environment.
The symbols for the heavy metals contained
are: Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance
with the EU Waste Electrical and Electronic
Equipment Directive (WEEE).
Please do not dispose of this instrument in
household waste. The user is obligated to
take end-of-life devices to a designated col-
lection point for the disposal of electrical
and electronic equipment in order to ensure
an environmentally-compatible disposal.
the batteries
plug to the socket,
wipe dry if necessary
between transmitter and
receiver (max. 40 m)
source of interference
manual
probe in the meat
21