Battery Replacement - TFA FUN 30.5050.01 Mode D'emploi

TFA_No. 30.5050_Anleit_08_19
FUN – Digital thermo-hygrometer
Sad face
WET
8. Positioning and fixing
• The device can be placed onto any flat surface with the foldable
stand found at the back of the unit. Press firmly with both thumbs
until the stand is properly locked in place and a click is heard.
• The device can be wall mounted at a chosen location by the mount-
ing hole found at the back of the unit.
• Avoid radiators and direct sunshine.
9. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if the device will not be used for an extended
period of time.
• Keep the device in a dry place.

9.1 Battery replacement

• When the batteries are used up, the low battery icon appears on the
display.
30
14.08.2019 10:42 Uhr
too wet
≥61%
Seite 16
FUN – Digital thermo-hygrometer
• Open the battery compartment and insert two new AAA 1.5 V batter-
ies, polarity as illustrated.
• Close the battery compartment again.
10. Troubleshooting
Problem Solution
➜ Ensure the batteries' polarities are
No display
➜ Change the batteries
➜ Activate DCF reception in setting
No DCF reception
➜ Press the SET button to activate the
➜ Choose another place for your
➜ Wait for an attempt reception
➜ Check if there is any source of
correct
mode (On)
DCF reception manually
product
during the night
interference
31