Getting Started - Bosch MMD 540H Mode D'emploi

6 | MMD 540H Hybrid Multimeter | Safety
Safety Cont'd...
DANGER
Risk of Shock, Electrocution, Severe Injury or Death
Hybrid electric, plug-in hybrid and electric vehicles have high-
voltage components. Use this tool on these vehicles only if:
f You are specially trained in high-voltage electrical system repair
on hybrid electric, plug-in hybrid and electric vehicles.
f You have already read and are following the OEM manufacturer's
approved hybrid electric, plug-in hybrid and electric vehicle
service. These procedures must be followed due to the high
voltages in hybrid electric, plug-in hybrid and electric vehicles.
f You are using the CAT III / 1000 V rated leads included with this
Multimeter kit.
f You are wearing proper protective gear, including Class 0 Type
I electric service gloves that are free from defects / faults and
that meet ASTM D120 Standards and protect up to 1000 Volts
AC / 1500 Volts DC.
Failure to follow these steps could
result in shock or electrocution,
causing severe injury or death.
Robert Bosch LLC MMD 540H Instruction Manual | Version 1 | December 2010
MMD 540H Hybrid Multimeter | Getting Started | 7

Getting Started

This chapter will help you get started. It describes the basic
functions of the Meter.
MMD 540H Instruction Manual | Version 1 | December 2010 Robert Bosch LLC