Safety - Bosch MMD 540H Mode D'emploi

2 | MMD 540H Hybrid Multimeter | Introduction
This chapter covers brief, introductory information, You will find:
f Safety precautions
Robert Bosch LLC MMD 540H Instruction Manual | Version 1 | December 2010
MMD 540H Hybrid Multimeter | Safety | 3

Safety

DANGER
f Engines produce carbon monoxide which
is odorless, causes slower reaction time,
and can lead to serious injury. When the
engine is operating, keep service areas
WELL VENTILATED or attach the vehicle
exhaust system to the shop exhaust
removal system.
f Set the parking brake and block the
wheels before testing or repairing the
vehicle. It is especially important to block
the wheels on front-wheel drive vehicles;
the parking brake does not hold the drive
wheels.
f Wear an eye shield when testing or
repairing vehicles.
Exceeding the limits of this meter is
dangerous. This will expose you to serious
or possibly fatal injury. Carefully read and
understand the cautions and the specification limits of this meter.
f Voltage between any terminal and ground must not exceed 600V
DC or 600V AC.
f Use caution when measuring voltage above 25V DC or 25V AC.
f Circuit tested must be protected by a 20A fuse or circuit breaker.
f Do not use the meter if it has been damaged.
f Do not use the test leads if the insulation is damaged or if metal
is exposed.
MMD 540H Instruction Manual | Version 1 | December 2010 Robert Bosch LLC