Service Address; Technical Data - AL-KO Solo FMD 90.5 Mode D'emploi

7 Troubleshooting
7.1 Safety
Procedure for failures and accidents
1 Initiate emergency stop (leave working position).
2 Stop the carrier.
3 Determine the failure cause.
4 Remedy failure or contact authorized dealer.
7.3 First action for troubleshooting
Failure / Error message
Irregular mowing result
V-belt slips
Mower vibrates
8

Technical data

Translation of the original operating instructions
Remedy
- Blades are blunt
- Mower inclination is inappropriate (see 3.4.3)
- Grass accumulation in mower
- Excessively high speed at insufficient motor rpm.
- Different pressure levels in wheels
- Retension spring at lever for V-belt tension.
- V-belt is not flush in V-belt disks
- Tighten blade bolts
- Blades are imbalanced replace them by new, original
blades.
0-* 1/ .
7.2

Service address

Please contact your sales consultant in case of failures,
problems or otherwise. Please always indicate the solo by
AL-KO product serial no. in inquiries. (Please refer to
nameplate on the solo by AL-KO product or on the Operation
Manual cover).
.
Notes
- 13 -