Campbell Hausfeld CE2002 Serie Instructions D'utilisation Et Manuel De Pièces page 11

Troubleshooting Guide (Continued)
Symptom
Oil in the discharge air
cAuSe
1� Worn piston rings
2� Compressor air intake
restricted
3� Restricted breather
4� Excessive oil in
compressor
5� Wrong oil viscosity
6� Connecting rod out of
alignment
Solution
1� Replace with new rings�
2� Clean filter� Check for other restrictions in the intake system�
3� Clean and check breather for free operation�
4� Drain down to full level�
5� Use SAE 30 (ISO 100) non-detergent compressor oil�
6� Replace rod�
Series CE2002
www.campbellhausfeld.com 11