Sony BC-L90 Mode D'emploi page 23

b Channel 1 charge connectors
Supplies power when the mode select
switch is set to CHARGE1.
The charging current is automatically
blocked when a battery pack other than a
lithium-ion battery pack has been
mistakenly attached.
c Channel 2 charge connectors
Supplies power regardless of the setting of
the mode select switch.
The charging current is automatically
blocked when a battery pack other than a
lithium-ion battery pack has been
mistakenly attached.
d CHARGE indicators
Shows the charging status of the attached
battery packs during charging of battery
packs.
For details, see "Charging Battery Packs" on page
24.
e Mode select switch
CHARGE1: Supplies power to lithium-ion
battery packs connected to channel 1
and channel 2.
DC OUT: Supplies DC power from the DC
OUT connector, and at the same time
supplies power to a lithium-ion battery
pack connected to channel 2.
(A battery pack connected to channel 1
is not charged.)
f DC OUT indicator
Lights in green when the mode select
switch is set to DC OUT and DC power is
being supplied.
If some trouble is detected, the indicator
goes dark.
g AC input connector
Connects to an AC power source via an AC
power cord (not supplied).
h Charge mode switch
Use this switch when charging lithium-ion
battery packs other than the BP-FL75. This
switch is disabled when charging BP-FL75
battery packs.
Switch Charge mode
position
H Batteries are charged to
their full capacity.
L Charges batteries to less
than their full capacities to
extend the life of the
batteries.
Location and Function of Parts 23