How To Assemble - Eureka 4750 Série Guide Du Propriétaire

●
E
●
K1
8
●
I
●
K2
FIG. 1
●
K1
●
H
●
I
FIG. 2
●
G
●
K2
●
H
FIG. 16 FIG. 3
ENGLISH

How To Assemble

CAUTION: Assemble the cleaner completely before using.
CAUTION: Moving parts, make sure the on/off switch is in the off
position and stay clear of the brushroll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Remove all components from the carton and check that all of the parts
are available from the parts list on page 6 (or see the quick start guide).
Have a Phillips screwdriver available (one is NOT provided in the package)
Step 1: (FIG. 1) Assemble the rear housing
it on top of the base and attaching to the base using a long screw
●
provided K2 .
Step 2: (FIG. 2) Attach the tool caddy
●
I
by sliding it onto the housing, and then attach using the 2 short
●
screws K1 provided.
Step 3: (FIG. 3) Attach the handle
downward and then securing with a long screw
(CONTINUED)
● ●
I E
to the base by sliding
●
H
to the top of the rear housing
● ●
G to top of tool caddy H by sliding it
●
K2 .