Pando PHC-943 Manuel D'utilisation page 71

INOXPAN S.L.
PROGRAMING THE COOKING TIME AND COOKING STOP TIME
1. Select a cooking function and a temperature.
2. Press
or until the
"0_00" will appear on the display.
3. Select the cooking time by touching
time will appear on the display and the
4. Press
to select the option
5. Press or until the
"0_00" will appear on the display..
6. Select the cooking end time by pressing
7. The oven will remain disconnected with the
programmed.
8. When it is time to start cooking, the oven will turn on and will operate for the programmed time.
9. While cooking, the remaining cooking time will be displayed and the
10. When the cooking time is up, the oven will turn off, a buzzer will sound, and the
flash.
11. Press any key to stop the buzzer and turn off the
12. Set the controls to position
You can change the remaining cooking time at any time by touching
starts to flash quickly. Press
symbol on the display starts flashing, then press
or and press
symbol will flash.
symbol on the display starts flashing, then press
or
to turn off the oven.
to change the time.
. You will hear 2 beeps, the remaining
. and press to select the option.
and symbols lit up. The oven is now
symbol. The oven will switch on again.
or
EN - 11
. The indication
The indication
symbol will flash.
symbol will
until the symbol