Display Description; Other Functions - Pando PHC-943 Manuel D'utilisation

INOXPAN S.L.

1.5. DISPLAY DESCRIPTION

KEYS
, and : Enable you to program the functions.
: Enable you to program the functions.
: Enable you to stop the cooking functions.
SYMBOLS
POWER LEVEL
WARNING TIMER: Lights up when the clock/timer is selected. Generates an acoustic signal
when the time is up. The oven does not turn off at the end of the timer period. This function can
also be used while the oven is cooking.
PROGRAMING: Lights up to indicate that the oven is programmed (cooking time, stop
time or total).
Cooking Time: This program allows you to program the cooking time, after which the

oven will turn off automatically.
Cooking Stop Time: This setting allows you to program the time for cooking to stop,

after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This setting allows you to program the

cooking time and cooking stop time. The oven switches on automatically at the set time
and operates for the selected cooking time (Cooking Time). It then switches off
automatically at the indicated time (Cooking Stop Time).
SAFETY BLOCK: Indicates that the touch keys are blocked, preventing modifications by small
children.

OTHER FUNCTIONS

HEATING: Indicates that the oven is transmitting heat to the food.
DEFROSTING BY TIME: Lights up while the defrosting by time function is on.
DEFROSTING BY WEIGHT: Lights up while the defrosting by weight function is on.
WARNING
The sensivity of the touch keys adapts continually to environmental conditions.
Make sure the surface of the control panel is clean and free of obstacles when plugging in the
oven.
If the display does not respond correctly when you touch the keys, unplug the oven for a few
seconds and then plug it in again. Doing this causes the sensors to adjust automatically so that
they will react once more to fingertip control.
EN - 7