Product Liability And Guarantee; Personnel; Intended Use And Field Of Application; Legal Declarations - Honeywell Elster SM-RI-X Série Mode D'emploi

Honeywell

1.5 Product liability and guarantee

The responsibility as to whether the measuring instrument is suitable for the
intended use is that of the operator. The manufacturer cannot accept any
liability for the consequences of misuse by the operator. Improper
installation or operation of the measuring instruments (systems) will render
the warranty void. Furthermore, the relevant "General Terms and Conditions"
which form the basis of the purchase contract also apply.

1.6 Personnel

This manual is aimed at staff who have adequate specialist and technical
knowledge (in Germany, for instance, in accordance with DVGW Codes of
Practice 492 and 495 or comparable technical regulations) on the basis of
their training and experience in the sector of energy and gas distribution.

1.7 Intended use and field of application

Model series SM-RI-X is designed for calibratable volumetric metering.
Model series Q75 is designed for non-calibratable volumetric metering.
All devices are suitable for metering the following media:
 Flammable gases: natural gas/town gas/propane/butane
 Non-flammable gases: air/nitrogen/inert gases
 Other areas of application or media, see Annex C – List of gas types or
on request

NOTE!
 The hydrogen content of gas mixtures must not exceed 10%.
This product is not intended for
 metering aggressive gases, e.g. biogas or sewage gases, oxygen or
acetylene.

1.8 Legal declarations

 The metrological conformity assessment is based on the regulations of
the country concerned, in which the measuring instrument will be used.
 The period of validity of calibration is based on the regulations of the
country concerned, in which the measuring instrument will be used.
12 73024521a © Elster GmbH | All rights reserved. Subject to modification