Commands; Description Of The Tn40 Control Panel; Main Screen - ChefLine TN40 Manuel D'utilisation Et D'entretien

5 COMMANDS

Description of the TN40 control panel

1. Display;
2. Parameter setting:
- UPPER TEMPERATURE;
- LOWER TEMPERATURE;
- CONVEYOR SPEED;
3. Access to the menu with entries:
- PROGRAMS;
- PROGRAMMED ON/OFF FUNCTIONS;
- DATE HOUR;
- CONVEYOR DIRECTION;
- LANGUAGE;
- MAINTENANCE MENU;
- EXIT;
4. Confirm the set values or Start/Stop on the main screen;
5. Increase function when setting values or navigating to
the right, if in the main screen;
6. Decrease function when setting values or navigating to
the left, if in the main screen;
7. Switch card on/off.

Main screen

1. UPPER TEMPERATURE: temperature detected by the upper probe;
2. LOWER TEMPERATURE: temperature detected by the lower probe;
3. UPPER RESISTORS OPERATION SYMBOL: it is activated when the upper resistors are on to bring the detected
temperature up to the roof set point;
70