Installation Procedure For Windows 2000 Os - Belkin F5U219 Manuel De L'utilisateur

Installation

Installation Procedure for Windows 2000 OS

This installation procedure will successfully install two USB OHCI host
controllers and a single USB 2.0 enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully
seated.
3. Insert the Belkin USB 2.0 driver installation CD into your computer's CD-
EN
ROM drive.
4. After installing the PCI Card, turn on the computer.
5. After loading, the Windows 2000 OS will detect "NEC PCI to USB Open
Host Controller". The required driver support will be automatically
installed. No user input is required. This will repeat one more time.
6. The Windows OS will detect "Universal Serial Bus (USB) Controller". This
is the USB 2.0 EHCI host controller. The "Found New Hardware Wizard"
window will appear. Select "Search for a suitable driver for my device
(recommended)" and click "Next".
7. A new "Found New Hardware Wizard" window will open. Check the "CD-
ROM drive" box. Click "Next".
8. The Windows OS will find "Belkin USB 2.0 Hi-Speed Host Controller".
Click "Next".
9. The Windows OS will now install the "Enhanced Host Controller" driver.
Click "Finish".
10. Installation of the USB 2.0 Dual-Port PCI Card is now complete.
6 6